20
Jun
10

Tutorial – Ribbon Stretchy Spine Rig

This simple tutorial will guide you in the creation of a Ribbon Stretchy Spine. Nowadays it’s not as commonly used as the IK Spine Rig but it fits well in a cartoon rig. It will be fully stretchy and will have twist from the three controls we are going to create.

First of all we have to create a NURBS plane. The spine will have 5 joints so the NURBS plane needs 5 V patches and must have a Cubic Surface degree.

This will create a NURBS plane along the Y axis with 5 V patches and 1 U patches and three degrees in both U and V. But we’ll have to rebuild the curve so it only has 1 degree in U because we only need three degrees in V.

To do that we select the NURBS plane and click (in the Surfaces module) on Edit NURBS>Rebuild Surfaces. In the option window we select the U direction, set the U spans to 1 and the U degree to 1. The V values will be ignored.

Now the NURBS plane should look like this:

In the next step we have to attach a Hair System to the NURBS plane to use it as the drivers for the joints that will be skinned to the model.

We have to select the  NURBS plane and click (in the Dynamics module) on Hair>Create Hair. The U count must be set to 1 and the V count must be set to 5.

This will create a full Hair System but we only need the follicles so we have to delete the output curves and the hairSystem node.

Now we have to create the joints. Place then individually at the same position as the follicles and then parent them under each follicle.

Now if we move any Control Vertex of the NURBS plane the joints will follow the plane perfectly.

The next step is to create the driver system for the spine rig.

First of all create a joint structure for the top, middle and bottom parts of the NURBS plane and place them as the image below.

Now create the controls that will drive the joints and locators that will be used to Aim Constraint from top to bottom and vice versa, and also locators that will be used as the Up Object for those Aim Constraints.

The scene and Hypergraph should look as the image below.

Now we place the joints under each Aim locator.

The next step is to Aim Constraint the locators.

First, select the topCtl object, then shift-select the btmAim locator and click (in the Animation module) on Constraint>Aim Constraint.

Set the Aim Vector to Y, the Up Vector to X and the World Up Type to Object and type btmUp.

Next, select the btmCtl object, then shift-select the topAim locator and click (in the Animation module) on Constraint>Aim Constraint.

Set the Aim Vector to –Y, the Up Vector to X and the World Up Type to Object and type topUp.

Now select both topCtl and btmCtl and then shift-select midCtlGrp and create a Point Constraint.

After that we have to aim the middle control to the top control, so select the topCtl and then shift-select the midAim locator and create an Aim Constraint. Set the Aim Vector to Y, the Up Vector to X and the World Up Type to Object and type midUp.


The system should now look like this when you move it around.

Now we have to bind the driver joints to the NURBS plane so the system we created can drive the joints that will be smooth binded to the geometry.

Select the topDriver00, midDriver00 and bottomDriver00 joints and then shift-select the NURBS plane. Then click (in the Animation module) on Skin>Smooth Bind with these options.

Now, when you move, for instance, the center control, the NURBS plane will deform, moving in the process the joints placed in the NURBS plane. We will have to change the weighting on the Control Vertex so we can draw a perfect arc when we move the middle control.

Select the Control Vertex and click Window>General Editors>ComponentEditor. Go to the Smooth Skins tab and change the weight values until it look like this or until you have the deformation you’re looking for.

Finally the Ribbon Stretchy Spine is finished. You may like it or not, but it’s just another way to rig an stretchy spine, a long neck or to rig anything you may find this system suitable for.

You can also read this tutorial here: http://www.creativecrash.com/tutorials/ribbon-spine-rig

Advertisement

6 Responses to “Tutorial – Ribbon Stretchy Spine Rig”


  1. 1 Jake
    June 27, 2010 at 8:29 pm

    Do you have a video example of an animation using this rig?

    • June 27, 2010 at 10:36 pm

      Not really. I just made this simple tutorial as an alternative for the more common spine rig. This technique has it’s own advantages and disadvantages but I mostly use the ‘normal’ stretchy spine rig.

      Anyway, I’m pretty sure you can find videos of rigs using this technique on Vimeo or even Youtube.

  2. 3 Ishie
    April 16, 2011 at 7:18 pm

    Does it have to be made with Nurbs? What if I was to use a polygon plane? Polygons have a much better range of texturing capability.

  3. November 3, 2011 at 3:24 am

    Awesome tutorial man! I’ve been wanting to learn this technique for a while. Sadly, Fahrenheit Digital stopped producing the training DVDs of this. I just wanted to give you guys a little background on this technique. From sources that I’ve read, this technique was introduced by Character TD Aaron Holly. At the time, he produced this technique for Disney’s “Meet the Robinisons”. It provided great cartoony capabilities, as seen in the movie. As well it provided great control of volume preservation and twisting flexibility without breaking after 180 deg.

  4. 6 Harwin
    September 12, 2012 at 11:09 am

    thankx dude…. i’ve been searching for this…. 🙂


Leave a Reply to Jake Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


June 2010
M T W T F S S
 123456
78910111213
14151617181920
21222324252627
282930  

Categories


%d bloggers like this: